Glossary
LETTRE `C`
CODIFICATION OF MS COMPRESSION SPRING DESIGNATIONS
The COMPRESSION MS springs are defined as: "CP-MS" + (number) + (Material )
The CONICAL COMPRESSION MS springs are defined as: "CPCO-MS" + (number) + (Material )
Material = "A" for Steel or "X" for Stainless Steel
CODIFICATION OF MS RING DESIGNATIONS
The RINGS MS are defined as: "Jonc-MS" + (number) + (Material)
Material = "A" for Steel or "X" for Stainless Steel
CODIFICATION OF MS TENSION SPRING DESIGNATIONS
The springs of TRACTION MS are defined as follows: "TR-MS" + (number) + (Material) + "-" + (Type of loops) + (Position of loops)
Material = "A" for Steel or "X" for Stainless Steel
Type of loops = default ENGLISH loops or "D" for GERMAN loops
Position of loops = default at 0° or 180° +/- 45° or "X" for 90° or 270° +/- 45°
CODIFICATION OF OLMA COMPRESSION SPRING DESIGNATIONS
The OLMA COMPRESSION springs are defined as: "CP-OLMA" + (Type) + "-" + (Diameter of the shaft) + "-" + (Diameter of the housing) + "-" + (Free length) + (Material )
Type = "T0" ... "T4",
Material = "A" for Steel or "X" for Stainless Steel
COMPENSATION SPRING TYPE 2000 OR TYPE ZF FOR ROLLER SHUTTER (GARAGE DOOR)
These torsion springs are designed to compensate for the opening and closing maneuvers of roller shutters according to well-defined rules.
They work in number of turns of rotation.
We have 2 families of springs with different loops
- the ZF type springs are winding on the LEFT
- the 2000 type springs are wound on the RIGHT
COMPRESSION SPRING
It is an organ that uses the elasticity properties of its material or its shape to return to its original shape after having been constrained by compression.
CONICAL COMPRESSION SPRING
It is a compression spring whose turns interlock with one another in compression.